AL-KO Jockey Wheel Clamp Rivet Nut for AL-KO 150v and 200v

Genuine Threaded Rivet Nut for jockey wheel clamp fitted to Al-ko 150v and 200v euro couplings.

Al-ko part number; 643108

1 x Rivet nut M12

Please Note you will need a bushing former to fit this rivet

How to fit the AL-KO rivet nut:
-Remove the old nut
-Insert the new rivet nut with the short side out
-Put the bushing former on the bolt and screw the bolt into the nut with the shaped end to the nut and tighten to approx 60Nm,
-The nut should now be tight
-Remove the bolt and former